America's Favorite Hot Tub Supply
America's Favorite Hot Tub Supply
You will need to create a new account, Please contact us for order history, thank you for your patience.
EasyPak EP500 by HydroQuip is the budget-priced, pump-top spa air control system designed for easy installation. Ultra-compact, non-metallic housing mounts directly to the hot tub pump.
You choose the right options for your spa, and the controller comes configured to your preferences. 240V heater systems utilize 4-wire electrical service; 120V systems come with 3-prong GFCI cord. Heater is pressure-switch protected. Operates on timer or thermostat mode.
Standard Circuits: 120V Pump, Blower, Ozonator, Heater
Upgrades: Optional Light Kit
Included with your new EasyPak:
Product notes: 240V systems must be connected to an approved GFCI-protected 4-wire electrical service. GFCI cord on 120V systems must be served by a properly grounded outlet. Voltage selection is not convertible. User and Electrician's Guides included. 2-year factory warranty. For 2" plumbing, see BX9924 Reducer Unions below. Sorry, not shippable outside the contiguous-48 USA.
More information:
Hot Tub Service Wiring Explained
Spa Pack Installation
Pump Circuit:
2-Speed, 120V only - 13A max
With air button & tubing
Blower Circuit:
120V only - 8A max
With air button & tubing
Ozone Circuit:120V only - 2A max
Timer:24 Hour
Mode Switch:
Timed Heat / Timed Filtration -OR-
Thermostat Heat / Timed Filtration
Built-in Heater:
120V or 240V
1.25kW / 4.5kW
Heater Indicator:Heat On Light
Thermostat:Full Range
Overheat Protection:
Built-in
Manual reset button
Pressure Switch:Built-in
Power Cords:
Provided for each circuit - 48"
Color-coded for easy identification
Light-ready Circuit:120V Hot receptacle
Light Kit Upgrade:
120V > 12V with colored lenses
Complete installation kit
Case:
Non-metallic
Rust-free ABS
Replaces:CS500T-A, CS500T-C, CS500T-A-15A, HT500T, HT502T, VOAAB2A-11004EO, 3-70-0091, 3-70-0901A, 58-355-1030, 58-355-1050, and more.
California Proposition 65 declaration:
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Awesome control box with heater that has a temperature maximum setting of 104 degrees, which is tops for me. My hot tub is over 23 years old and i thought i wasn't going to find a replacement bur SpaDepot came to the rescue and matched a picture i sent them. With a couple of small plumbing adjustments, i am off and running again. Thanks for your fantastic help SpaDepot
This unit does not hold a consistant temp. Ranges between 102 - 118. Adjust it down slightly ( 1/16"" ) and it drops to mid 90's.
Spa part fit perfect and works perfect!
I was very pleased to find this was a direct replacement for my older 2 person hot tub . It even had the same plastic heater housing as the original unit . Inlet and outlet pipes were a perfect fit and they included the required PVC unions . you have to glue them on yourself which is OK since you might have to adjust the lengths of the 1.5 pipes to fit your particular situation . It was nice to get the 2 new air control buttons which fit the old holes just fine . The wire & plugs for the motor and air blower were different than my original but I just took my time and wired them up proper so they are safe . The only drawback was that the 220V model did not have a built in GFI like my original so that was a bit of a pricey suprise that I acquired locally . If your tub is over 10 yrs old like mine I strongly suggest you replace the sliding gate valves on either side of this unit since the chemicals turn them into mush to the point that they dont turn off anything . I wish I had just ordered them from Spa Depot at the same time . Instead I had to run to the nearest spa store 120 miles round trip. The thermostat on this unit pegs out at a maximum temp of around 105 deg which is about as hot as you should ever go anyway. It took about a week to get the unit but that was right after the hoiday rush .
Sign up for sales, offers & news: